Page 33 - Nigel Ward and Co Catalogue 11th and 12th September 2026
P. 33
1456 An uncommon enamelled Rolls-Royce & 1463 A ''Canadian Automobile Association National
Bentley Owner Driver Club Badge, with the low Award'' motor Car Badge finished in red and
member's number 135 stamped to the front, blue and with the stainless steel two-bolt
manufactured by Pinches, London and fitted attachment bracket, 91 mm high (113 mm
with a Desmo England badge-bar mount and including bracket) and 116 mm wide approx.,
stainless steel allen-key bolts with nyloc nuts, boxed with leaflet, (very good condition but
4 1/4'' high x 2 5/8'' approx. some scratching verso).
1457 A Bentley Drivers Club motor Car Badge in the 1464 A circa 1950 vintage R.A.C. full member's
design of a knock-on wheel nut/spinner with motor Car Badge surmounted by a crown, the
black and green enamel and a Desmo England letters R.A.C. in chromium plating contrasting
badge bar attachment, clamp with stainless with the royal blue background, complete with
steel allen-key headed bolts and nyloc nuts, the badge-bar mounting lug and loop/bracket,
93 mm high x 102 mm wide approx. stamped verso with the member's no V218647
1458 A vintage Sunbeam Talbot Owners Club motor and the maker's name ''B'ham Medal & Badge
Car Badge, with the low owners number 181, Coy Ltd'', 106 mm high (154 mm including the
finished with green, red and white enamelled bracket) and 94 mm wide approx.
details and surmounted by a coronet, and with 1465 A domed enamelled metal Mallorca motor Car
the manufacturers name J. Fray Ltd, B'ham, 97 Badge of shield shape decorated in light/dark
mm high, 108 mm wide approx, the badge bar blue, red, green, yellow and beige enamels
attachment bracket/loop is present. and with two threaded attachment studs and
1459 An old, circa 1960, motor car AA badge nuts to the rear, 80 mm high, 60 mm wide
numbered 1B23031, of the domed type with approx, stamped verso ''Made in Spain''.
the intertwined AA lettering against a yellow 1466 A flat chromium plated metal ''Rover Owners
background and the winged wheel pediment, Association'' motor Car Badge with black cold-
complete with the bar attachment loop painted detail below the oars and to the bow-
bracket and having an attached fleeing fox waves of the Viking ship depicted in relief
below marked ''.....HEREFORD'' to the brush, (stamped verso to the mounting lug
143 mm long. ''Birmingham Medal Coy'', 100 mm high overall
1460 A Hillman Imp Californian boot lock x 67 mm wide approx; and a Rover bonnet
cover/trim. emblem depicting a Viking's head with a
1461 An unusual ''The Order of the Road, 36 Year winged helmet and two rear threaded
Driver'' motor Car Badge decorated with white, attachment studs, 91 mm high, 86 mm wide,
red and blue enamels, 104 mm high, 90 mm some distortion (these were apparently fitted
wide approx (125 mm high overall including to Rover P4 cars manufactured from 1954 to
the fixing fitment), a seldom seen badge for 1964.
this British Motoring organisation which was 1467 A vintage VW, probably Beetle, bonnet Badge
apparently established to advocate courteous, depicting a wolf on the ramparts of a castle
safe and accident free driving, some slight with blue waves below, believed to be the coat
damage to enamels, stamped verso ''Rd No of arms relating to Wolfsburg, some damage to
734484, No A2852'' and the manufacturer's the enamel, 81 mm high, 45 mm wide approx.
name ''Spencer, London''. 1468 A mirrored pair of Jaguar wing/side leaping
Jaguar Badges in plastic, each 105 mm x 35
1462 A highly collectable, art deco design ''Owner mm approx, a metal effect plastic Volvo badge
Drivers Club'' motor Car Badge, the oval black, 130 mm approx, six badge bar attachment
white and red enamelled section enclosed loop brackets (3 double & 3 single bolt) and a
within a laurel wreath perimeter and depicting Herefordshire Constabulary metal clip Badge,
a vintage motor car, the letters O & C surmounted by the king's crown, so assumed
representing the tyres, the D forming the 1952 or earlier.
central passenger compartment, the twin hole
bolt mounting bracket to the base is present,
74 mm high (60 mm excluding mounting), 68
mm wide, verso is the stamped maker's name
''Collins, London'' and the member's number
5075, some wear commensurate with age.
31
